REMOUNTING:
I used a wide, flat scraper to chisel the foam boards free of the
plexiglass, managing to do so while causing little damage to them, then
laid them out on foamcoare boards (as straight as I could find) and
traced them. After tracing, I sprayed in French blue for all the water
areas and then used spray-mount aerosol cement to glue the styrofoam
terrain to the foamcore boards. I then carefully reflocked all of
the edges where the four parts that made up each new 'quarter' were
joined so as to pretty well hide the edges. Swamps were done in the
same way as before, and toothpicks were strategically situated to hold it
all together so that it wouldn't shift around under play.
PREVIOUS—BOARDS